» Your Stories
» Your Stories
We will be glad to hear your stories/experiences with Stillink systems in your applications. If you wish to share with us and other Stillink users your stories/experiences, please e-mail us at email@example.com
Ph Joubard from Duons MCO, FRANCE says:
`Interfacing our V5.2 SWING system to SS7 public switch network was quite easy & cheap with STILLINK 200 access system : V5.2 interface validation was quick due to efficient remote support and customer didn’t find any issue on the SS7 side;
Today, we plan to integrate the STILLINK 3200 as VoIP gateway to keep our SWING system up and running in NGN environment.`
Adil Sassa from Ingenico S.A., FRANCE says:
`Our Telecom R&D were looking for a ISDN E1 R2 simulator to develop this feature on our communication controller. We found Telesis on the Internet.
Sales contact and availability were very fine. Installation was quite easy and Telesis support was very helpful and efficient.
Thanks to Telesis, we are now able to propose MFCR2 signalling to our customers.`
Sahrul Anuar from RITES Sdn Bhd, MALAYSIA says:
`As a Wireless Local Loop vendor, we were having difficulty to interface with some PABXs before. With the introduction of Stillink 200 making ISDN to CAS E&M signaling conversion, we have connected these PBXs successfully.
It was our first time with Stillink 200 and we have found that Port monitoring, Xphone software, SIP functionality were really useful during fine tuning and diagnosis while making interfacing operational.
Even though we have used this product for the first time, online support and support team have been very competent and experienced to handle any situation to make our integration studies succesful.
Many thanks. `
Erik Inasaridze from STCPlus, GEORGIA says:
`We were seeking for solution to connect big IP contact center to local PSTN and GSM operators in Georgia. We decided to use Stillink 800 converters to convert 8 SS7 E1s into EuroISDN. We tested them and everything worked fine.
Vincent Dal from Siemens, BELGIUM says:
`For a project in IRAQ, we needed our HiPath 4000 systems to be connected over v5.2. After searching the market for a very long time, we found the Stillink converters. We tested them, and it worked fine.
Thomas Grillmeier from AlpTelco, GERMANY says:
As Wireless Local Loop vendor, we connected successfully the first Stillink 200 in Bolivia. The First Converter from ISDN PRI to V5.2(LE).
S.V. Turin from Penza-Telecom, RUSSIA says:
`JSC Penzenskie telecommunicatsii (Penza-Telecom) is a local and regional PSTN operator, internet service provider and additional service provider (cable tv,voip etc.). Penza-Telecom covers the telecom market of Penza region in Russia.
As a result, we did our decision to build a subscriber segment (of 2,500 subscriber capacity) based on SIP/H.323 gateways with using convergent TDM-TCP/IP environment and implemented it with the Stillink 200.`
© Telesis A.S. 2006-2013